Since then, I have updated the crazycat package and added support for the dvb-latest package, because I had a lot of stream quality problems with the Astrometa DVB-T2/C tuner under the crazycat addon. It took about a week to put the packages and their configuration together to make them work.
PVR PLUS 1 0 ZIP USB SAMSUNG Added
Download Zip: https://tinurll.com/2vzVsM
Views provide access to all the cameras and devices added to AXIS Camera Station. A view can consist of one or several cameras, a sequence of items, a map or a webpage. When cameras and devices are added to or removed from AXIS Camera Station, the views are updated automatically. New cameras and devices are added as new views, and the number of views are optimized for the number of installed devices. Views can be accessed by all users. For information about user access rights, see Configure user permissions.
Add views or cameras. The views or cameras added in the sequence are marked with a number to show its order in the sequence. Use the Type to search field for find specific views or cameras.
Right-click a recording and select Export > Add recordings. The single selected recording is added to the export list. Optionally use Add event recordings to add all recordings that occurred within the time of an event.
When a recording or a snapshot is added to the export list, the Export tab is displayed. If the Incident report tab is displayed, click Switch to export to navigate to the Export tab.
The application is automatically installed on new cameras added to AXIS Camera Station but can also be installed from the device management page, see Install camera application. The application enables AXIS Video Content Stream in the camera. The use of AXIS Video Content Stream is only permitted through AXIS Camera Station.
To ensure image authenticity and integrity, a digital signature can be added to the exported recordings with or without password. The digital signature can be further verified in AXIS File Player to check whether the recording has been changed.
When a recording or a snapshot is added to the export list, the Incident report tab is displayed. If the Export tab is displayed, click Switch to incident report to navigate to the Incident report tab.
Set tilt orientation: Click the link to set the tilt orientation. Tilt orientation must be set before the camera can be added. Select tilt orientation Ceiling, Wall, or Desk depending on how the camera is mounted. Tilt orientation is a required setting for some camera models. Setting tilt orientation ensures that video from the camera is presented correctly and that pan, tilt and zoom tools work correctly.
All view areas in a network camera are counted as one camera in the total number of cameras allowed by the AXIS Camera Station license. The number of cameras that can be added depends on the installed license. Each AXIS Camera Station license allows a particular number of cameras.
Go to Configuration > Devices > Cameras to view the list of all cameras that have been added to AXIS Camera Station. The information includes the camera's name, address, MAC address, manufacturer, model, video channel and server if connected to multiple AXIS Camera Station servers.
A list of devices added to AXIS Camera Station is displayed. Use the Type to search field to find devices in the list. To hide or show columns, right-click the header row and select which columns to show. Drag and drop the headers to display the columns in different order.
Go to Configuration > Storage > Management to open the Manage storage page. A list of the local storage and network storage that have been added to AXIS Camera Station is displayed. This page contains the following information:
Go to Configuration > Storage > Management to open the Manage storage page. In this page, you can specify the folder to store recordings. To prevent the storage from becoming full, a maximum percentage of total capacity to be used by AXIS Camera Station should be set. Additional local storage and network drives can be added for security and more space.
Go to Configuration > Storage > Selection to open the Select storage page. This page features a list of all cameras that have been added to AXIS Camera Station and you can specify the number of days to keep recordings for specific cameras. When selected, the storage information can be seen under Recording Storage. Multiple cameras can be configured at the same time.
To turn on fallback recording, make sure that AXIS S3008 Recorder and the devices have been added and the recorder has been configured as recording storage for the device. See Set up AXIS S3008 Recorder.
If motion recording is selected when cameras are added to AXIS Camera Station, AXIS Video Motion Detection 2 and 4 will only be installed on cameras with the required firmware. Other cameras will use the built-in motion detection. You can install the application from the device management page. See Install camera application.
Go to Configuration > Recording and events > Action rules and a list of rules that have been added to AXIS Camera Station is displayed. Use the Type to search field to find a rule.
Motion detection: The motion detection trigger is activated when the camera detects motion within a defined area. Detection is performed by the camera which means that no processing load is added to the AXIS Camera Station server. To find out if motion recording is enabled, go to Configuration > Action rules. See Create motion detection triggers.
Active tampering alarm: The tampering trigger is activated when the device is repositioned or when the lens is covered, sprayed or severely defocused. Tampering detection is performed by the device which means that no processing load is added to the AXIS Camera Station server. Active tampering alarm is available for devices with tampering support and with firmware 5.11 or later. See Create active tampering alarm triggers.
AXIS Cross Line Detection: AXIS Cross Line Detection is an application that can be installed on cameras and video encoders. The application detects moving objects that cross a virtual line and can, for example, be used to monitor entrance and exit points. Before using AXIS Cross Line Detection as a trigger, the application must be installed on the camera. Download the application from www.axis.com . Then go to the Device management page, select the camera, right-click and select Install camera application. See Install camera application. The trigger is activated when an application detects a moving object. Since detection is performed by the application on the camera, no processing load is added to the AXIS Camera Station server. AXIS Cross Line Detection can be installed on products with support for AXIS Camera Application platform. See Create AXIS Cross Line Detection triggers.
Input/Output: The Input/Output (I/O) trigger is activated when a device's I/O port receives a signal from, for example, a connected door, smoke detector or switch. Before using an I/O trigger, the I/O port must be added to AXIS Camera Station. Go to Configuration > I/O ports. See Create input/output triggers.
The motion detection trigger is activated when the camera detects motion within a defined area. Detection is performed by the camera which means that no processing load is added to AXIS Camera Station server.
The active tampering alarm trigger is activated when the camera is repositioned or when the lens is covered, sprayed or severely defocused. Tampering detection is performed by the camera which means that no processing load is added to AXIS Camera Station server.
AXIS Cross Line Detection is an application that can be installed on cameras and video encoders with support for AXIS Camera Application Platform. The application detects moving objects that cross a virtual line and can, for example, be used to monitor entrance and exit points. The trigger is activated when an application detects a moving object that crosses a virtual line. Since detection is performed by the application on the camera, no processing load is added to AXIS Camera Station server.
Choose Selected and click Cameras. A list of all cameras added to AXIS Camera Station is displayed. You can use the Type to search field to find a specific camera, Select all to select all cameras or Deselect all to deselect all cameras.
Set output: This action sets the state of an output port to control the device connected to the output port, for example to turn on a light or lock a door. Before using the output action, an output port must be added to AXIS Camera Station via Configuration > Recording and events > I/O ports. See Create output actions.
To attach snapshots in the form of jpg images from the cameras in the email notification as attachments, select Attach snapshots and click Cameras. A list of all cameras added to AXIS Camera Station is displayed. You can use the Type to search field to find a specific camera, Select all to select all cameras or Deselect all to deselect all cameras.
Before a user or group can be added, the user or group must be registered on the local computer or have an Windows Active Directory user account. Using Windows Active Directory, a high level of security can be implemented. 2ff7e9595c
Comments